
When people call a toy "body-safe", they mean it is made from a material that is non-porous, stable and easy to clean properly. It sounds technical, but it comes down to a few simple rules. Once you know them, you can spot a poor product in seconds.
- Best choices: platinum-cure silicone, stainless steel, borosilicate glass and hard ABS plastic.
- Be careful with: TPE and TPR, "jelly", PVC and vague labels like "silicone blend".
- Red flags: no material listed, "for novelty use only", a strong chemical smell or a sticky surface.
- Lube: water-based works with every material. Silicone lube and silicone toys do not always mix.
Why the material matters
Two things decide whether a material is body-safe.
Porosity. Some materials have tiny pores, far too small to see. Bacteria can settle in them, and no amount of washing gets them out completely. Non-porous materials have a closed surface, so soap and water can clean them fully.
Stability. Some soft plastics get their softness from added chemicals called plasticisers. Certain plasticisers, including some phthalates, are restricted in many products because of health concerns. Over time they can seep out of the material, which is often why cheap toys smell strongly or turn sticky. Stable materials do not change like this.
The safest materials
Platinum-cure silicone
The standard for quality soft toys. It is non-porous, holds no smell, copes well with warmth and cold, and lasts for years. It comes in every firmness, from very soft to very firm. Look for "100% silicone" or "platinum silicone", not "silicone blend".
Stainless steel
Heavy, smooth and completely non-porous. Steel is easy to clean and can be warmed in water or cooled in the fridge for temperature play. Look for medical-grade stainless steel, such as 316L.
Borosilicate glass
The same kind of glass used for lab equipment and quality cookware. It is non-porous, very smooth and handles temperature changes better than ordinary glass. Check it before each use, and stop using it if you find a chip or crack.
Hard ABS plastic
A rigid, non-porous plastic often used for the body of vibrators and wands. It is light and easy to clean. It has no give at all, so it suits smaller and smoother shapes best.
Materials to be careful with
TPE and TPR
Thermoplastic elastomer and thermoplastic rubber are soft and cheap, so they are common in budget toys and very realistic textures. They are porous, cannot be sterilised and wear out faster. If you use one, wash it well, let it dry fully and consider putting a condom on it. Replace it when its colour, smell or texture changes.
"Jelly", PVC and rubber
Older-style "jelly" toys are often PVC softened with plasticisers. They are usually porous, often smell strongly and may contain phthalates. Natural rubber latex can cause allergic reactions in some people. These are the materials most worth avoiding.
Vague labels
Words like "silicone blend", "realistic skin" or "soft-touch material" do not tell you what a product is made of. Without a clear material statement, assume it is porous.
Red flags in a product listing
- No material listed at all.
- "For novelty use only". This wording often appears on products that were never meant to be used on the body.
- A price that seems far too low for real silicone.
- Reviews that mention a strong smell, an oily film or a sticky surface.
- No care instructions from the maker.
You may read about a "flame test" for silicone online. It is not reliable, and it can damage the product. A clear material statement from a maker with a good reputation is a much better guide.
Matching lube to material
| Lubricant | Works with | Be careful with |
|---|---|---|
| Water-based | Every material, and condoms | Nothing in particular. It may just need topping up more often. |
| Silicone-based | Steel, glass, hard plastic and latex condoms | Silicone toys, because it can damage their surface. Test a small hidden spot first, or follow the maker's advice. |
| Oil-based | Steel and glass | Latex condoms, which it weakens, and TPE and other soft plastics. |
How to clean each material
| Material | Everyday cleaning | Boiling |
|---|---|---|
| Silicone, no electronics | Warm water and mild, unscented soap, or a toy cleaner | Often possible. Check the maker's care guide first. |
| Silicone with a motor | Wipe or rinse the surface, only as far as the maker says it is waterproof | Never |
| Stainless steel | Warm water and mild soap | Yes, if it has no electronics |
| Borosilicate glass | Warm water and mild soap; avoid sudden temperature changes | Follow the maker's advice |
| Hard ABS plastic | Warm water and mild soap | No |
| TPE and TPR | Mild soap and lukewarm water, then dry fully | No |
Whatever the material, let it dry completely before you store it. Toy cleaners are handy, but mild soap and water do the job for most products.
Storage
- Store each product separately, in a cotton bag or its own box.
- Keep soft plastics such as TPE and jelly away from your other toys. They can leave marks on, or damage, the surfaces they touch.
- Choose a cool, dry place away from direct sunlight and heat.
When to replace a product
Replace anything with cracks, tears or chips, or with a surface that has turned sticky, cloudy or smelly. With porous materials, a change in colour is also a sign. Good silicone, steel and glass can last for many years with simple care, which is why they are worth their higher price.
Find body-safe products
When you browse Adult Toys or Fantasy & Dragons, check the material on the retailer's page before you buy. If you are choosing your first fantasy design, our guide on how to choose size, firmness and shape is a good next read.
This guide is for general information about products for adults. It is not medical advice. Some links on Velvet Hoard are affiliate links: if you buy through them, we may earn a commission at no extra cost to you. How affiliate links work